Cable grips provide an efficient method of installing, pulling or supporting cables or any other cylindrical object within their grip& load bearing capacity. They are re-usable and very usefull tools for the safe laying of energy cables , control lines , communication cables , verhead lines etc. for fraction- relieved suspension of cables , hoses & many other purposes.

Hemakul grips are fabricated from high quality galvanized and stainless steel wire ropes so as to offer optimum mechanical strength and flexibility.The diameter and construction of the wire varies with the diameter of the cable or cylindrical object to be pulled or supported.The grips are made from Single, Twin, Triple or Quadruple wire rope design with varying number of loops depending on the cable diameter.
The appropriate dimensions have been devised in accordance to our experience and also the practical experience of our clients.Easy and efficient installation is the hallmark of our cable grips.They provide a secure connection between cable and winch ropes or draw ropes.Before pushing onto the cable, the grip is pressed together so the steel wire weave opens and the cable grip diameter increases.Then inserted onto the cable, as soon as the pull is applied to the cable grip,the flexible steel wire weave closes onto the cable sheaths. thereby holding the cable securely and reliably.However for any of these activities, it must be taken care that the respective diameters of the cables,ropes or hoses match the diameter of the cable grip,since while choosing a cable grip that is too large, it may slip off the cable jacket.

In a market environment geared to satisfy the demands of increasingly technosavvy clients,we at Hemakul, focus on evolving strategies that are responsive to customer requirements.We see an increasing need for a closer collaboration between the manufacturer and the buyer and will gladly consider any special oversize or new application requirements.